36 lines
1.5 KiB
Markdown
36 lines
1.5 KiB
Markdown
# esp32-ps4-jailbreak
|
|
|
|
This is a minimal implementation of the PS4 hack by qwertyoruiopz.
|
|
|
|
It only contains the 'PS4HEN v2.1.2'.
|
|
|
|
You will need an ESP32 board with 4MB flash memory and a PS4 on fw 5.05 to use the software.
|
|
|
|
## How to flash your ESP32:
|
|
|
|
#### Using Arduino IDE:
|
|
|
|
1. Download [AsyncTCP](https://github.com/me-no-dev/AsyncTCP) and [ESPAsyncWebServer](https://github.com/me-no-dev/ESPAsyncWebServer) and install these libraries in the Arduino libraries folder.
|
|
<br>Restart the Arduino IDE after this step.
|
|
|
|
2. Unpack the [latest release](https://github.com/CelliesProjects/esp32-ps4-jailbreak/releases/latest) zipfile.
|
|
|
|
3. Flash the compiled software to your ESP32.
|
|
|
|
#### Using pre-compiled binaries:
|
|
|
|
1. Flash the pre-compiled `esp32-ps4-jailbreak.ino.esp32.bin` file to 0x00010000.
|
|
|
|
2. Use this command (Linux) to flash the binary to an esp32 with a default partition table:<br>
|
|
`~/Arduino/hardware/espressif/esp32/tools/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m 0x10000 esp32-ps4-jailbreak.ino.esp32.bin`
|
|
<br>( you might have to adjust some things for your particular board )
|
|
|
|
### How to connect and install PS4HEN:
|
|
|
|
1. The ESP32 will start an accesspoint named `ESP32 5.05 jailbreak server`.
|
|
|
|
2. Connect to this AP with your PS4 and browse to `http://192.168.4.1/` to enable PS4HEN on your PS4.
|
|
|
|
#### Credits:
|
|
Specter, IDC, qwertyoruiopz, Flatz, CTurt, Mistawes, XVortex, Al-Azif
|