/*

  Constants.h
  Defines ATMEGA32U4 pins and other SENSORS and COMUNICATIONS static parameters.

*/
#define FirmWare  "1.5-0.1.0-A"

#define TWI_FREQ 100000L //Frecuencia bus I2C
/* 

ARDUINO ports definitions - GPIOS and ADCs 

*/

#define AWAKE   4      // WIFLY AWAKE
#define PANEL   A8     // PANEL LEVEL
#define LEVEL   A7     // BAT LEVEL 

#define IO0 5         // MICS5525_HEATHER
#define IO1 13        // MICS2710_HEATHER
#define IO2 9         // MICS2710_HIGH_IMPEDANCE
#define IO3 10        // MICS2710_HIGH_IMPEDANCE

//SHIFT REGISTER CONTROL
#define DS 7          // DS 74HC595
#define STCP 4        // STCP 74HC595 
#define SHCP 12       // SHCP 74HC595 

#define PSEL    0
#define P_WIFI  1
#define GPIO0   2
#define RST_ESP 3
#define CH_PD   4
#define GPIO16  5
#define OTG     6
#define SEL_MUX 7

#define CONTROL 8     // PIN CONTROL S2

#define S0 A4         //MICS_5525
#define S1 A5         //MICS_2710
#define S2 A2         //SENS_5525
#define S3 A3         //SENS_2710
#define S4 A0         //MICRO
#define S5 A1         //LDR


/* 
i2c ADDRESSES 
*/

#define RTC_ADDRESS          0x6F    // Direction of the RTC
#define E2PROM               0x50    // Direction of the EEPROM
#define ACCEL                0x1D    // Direction of the LSM303D
#define CHARGER              0x6B    // Direction of the BQ24292

#define POT1               0x51    // Direction of the Potenciometer 1 for MICS heather voltage
#define POT2               0x52    // Direction of the Potenciometer 1 for MICS heather voltage
#define POT3               0x50    // Direction of the Potenciometer 3 for sensor audio
#define si1145             0x60 
//#define bh1730             0x29    // Direction of the light sensor
#define Temperature          0x40    // Direction of the sht25    


#define R1  12    //Kohm
#define P1  100   //Kohm