/*! * @file midi_Defs.h * Project Arduino MIDI Library * @brief MIDI Library for the Arduino - Definitions * @version 4.2 * @author Francois Best * @date 24/02/11 * @license GPL v3.0 - Copyright Forty Seven Effects 2014 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #pragma once #include "midi_Namespace.h" #if ARDUINO #include #else #include typedef uint8_t byte; #endif BEGIN_MIDI_NAMESPACE // ----------------------------------------------------------------------------- #define MIDI_CHANNEL_OMNI 0 #define MIDI_CHANNEL_OFF 17 // and over #define MIDI_PITCHBEND_MIN -8192 #define MIDI_PITCHBEND_MAX 8191 // ----------------------------------------------------------------------------- // Type definitions typedef byte StatusByte; typedef byte DataByte; typedef byte Channel; typedef byte FilterMode; // ----------------------------------------------------------------------------- /*! Enumeration of MIDI types */ enum MidiType { InvalidType = 0x00, ///< For notifying errors NoteOff = 0x80, ///< Note Off NoteOn = 0x90, ///< Note On AfterTouchPoly = 0xA0, ///< Polyphonic AfterTouch ControlChange = 0xB0, ///< Control Change / Channel Mode ProgramChange = 0xC0, ///< Program Change AfterTouchChannel = 0xD0, ///< Channel (monophonic) AfterTouch PitchBend = 0xE0, ///< Pitch Bend SystemExclusive = 0xF0, ///< System Exclusive TimeCodeQuarterFrame = 0xF1, ///< System Common - MIDI Time Code Quarter Frame SongPosition = 0xF2, ///< System Common - Song Position Pointer SongSelect = 0xF3, ///< System Common - Song Select TuneRequest = 0xF6, ///< System Common - Tune Request Clock = 0xF8, ///< System Real Time - Timing Clock Start = 0xFA, ///< System Real Time - Start Continue = 0xFB, ///< System Real Time - Continue Stop = 0xFC, ///< System Real Time - Stop ActiveSensing = 0xFE, ///< System Real Time - Active Sensing SystemReset = 0xFF, ///< System Real Time - System Reset }; // ----------------------------------------------------------------------------- /*! Enumeration of Thru filter modes */ enum MidiFilterMode { Off = 0, ///< Thru disabled (nothing passes through). Full = 1, ///< Fully enabled Thru (every incoming message is sent back). SameChannel = 2, ///< Only the messages on the Input Channel will be sent back. DifferentChannel = 3, ///< All the messages but the ones on the Input Channel will be sent back. }; // ----------------------------------------------------------------------------- /*! \brief Enumeration of Control Change command numbers. See the detailed controllers numbers & description here: http://www.somascape.org/midi/tech/spec.html#ctrlnums */ enum MidiControlChangeNumber { // High resolution Continuous Controllers MSB (+32 for LSB) ---------------- BankSelect = 0, ModulationWheel = 1, BreathController = 2, // CC3 undefined FootController = 4, PortamentoTime = 5, DataEntry = 6, ChannelVolume = 7, Balance = 8, // CC9 undefined Pan = 10, ExpressionController = 11, EffectControl1 = 12, EffectControl2 = 13, // CC14 undefined // CC15 undefined GeneralPurposeController1 = 16, GeneralPurposeController2 = 17, GeneralPurposeController3 = 18, GeneralPurposeController4 = 19, // Switches ---------------------------------------------------------------- Sustain = 64, Portamento = 65, Sostenuto = 66, SoftPedal = 67, Legato = 68, Hold = 69, // Low resolution continuous controllers ----------------------------------- SoundController1 = 70, ///< Synth: Sound Variation FX: Exciter On/Off SoundController2 = 71, ///< Synth: Harmonic Content FX: Compressor On/Off SoundController3 = 72, ///< Synth: Release Time FX: Distortion On/Off SoundController4 = 73, ///< Synth: Attack Time FX: EQ On/Off SoundController5 = 74, ///< Synth: Brightness FX: Expander On/Off SoundController6 = 75, ///< Synth: Decay Time FX: Reverb On/Off SoundController7 = 76, ///< Synth: Vibrato Rate FX: Delay On/Off SoundController8 = 77, ///< Synth: Vibrato Depth FX: Pitch Transpose On/Off SoundController9 = 78, ///< Synth: Vibrato Delay FX: Flange/Chorus On/Off SoundController10 = 79, ///< Synth: Undefined FX: Special Effects On/Off GeneralPurposeController5 = 80, GeneralPurposeController6 = 81, GeneralPurposeController7 = 82, GeneralPurposeController8 = 83, PortamentoControl = 84, // CC85 to CC90 undefined Effects1 = 91, ///< Reverb send level Effects2 = 92, ///< Tremolo depth Effects3 = 93, ///< Chorus send level Effects4 = 94, ///< Celeste depth Effects5 = 95, ///< Phaser depth // Channel Mode messages --------------------------------------------------- AllSoundOff = 120, ResetAllControllers = 121, LocalControl = 122, AllNotesOff = 123, OmniModeOff = 124, OmniModeOn = 125, MonoModeOn = 126, PolyModeOn = 127 }; // ----------------------------------------------------------------------------- /*! \brief Create an instance of the library attached to a serial port. You can use HardwareSerial or SoftwareSerial for the serial port. Example: MIDI_CREATE_INSTANCE(HardwareSerial, Serial2, midi2); Then call midi2.begin(), midi2.read() etc.. */ #define MIDI_CREATE_INSTANCE(Type, SerialPort, Name) \ midi::MidiInterface Name((Type&)SerialPort); #if defined(ARDUINO_SAM_DUE) || defined(USBCON) // Leonardo, Due and other USB boards use Serial1 by default. #define MIDI_CREATE_DEFAULT_INSTANCE() \ MIDI_CREATE_INSTANCE(HardwareSerial, Serial1, MIDI); #else /*! \brief Create an instance of the library with default name, serial port and settings, for compatibility with sketches written with pre-v4.2 MIDI Lib, or if you don't bother using custom names, serial port or settings. */ #define MIDI_CREATE_DEFAULT_INSTANCE() \ MIDI_CREATE_INSTANCE(HardwareSerial, Serial, MIDI); #endif /*! \brief Create an instance of the library attached to a serial port with custom settings. @see DefaultSettings @see MIDI_CREATE_INSTANCE */ #define MIDI_CREATE_CUSTOM_INSTANCE(Type, SerialPort, Name, Settings) \ midi::MidiInterface Name((Type&)SerialPort); END_MIDI_NAMESPACE