const int buttonPin = 3;     
const int ledLargo =  5;    
const int ledCorto =  2;

// variables will change:
boolean flag_off = 0;         // variable for reading the pushbutton status

void setup() {
  // initialize the LED pin as an output:
  pinMode(ledLargo, OUTPUT);    
  pinMode(ledCorto, OUTPUT);   
  // initialize the pushbutton pin as an input:
  pinMode(buttonPin, INPUT);
  digitalWrite(ledCorto, LOW);
  digitalWrite(ledLargo, LOW);
  Serial.begin(9600);
}

void loop(){

  if(!digitalRead(buttonPin))
  {
    delay(10);
    if ( (!digitalRead(buttonPin)) && !flag_off ) {  
      // turn LED on:    
      digitalWrite(ledLargo, HIGH);  
      digitalWrite(ledCorto, HIGH); 
      Serial.println("Encendido");
      flag_off = 1; 
    }
  } 
  else
  {
    delay(10);
    if( (digitalRead(buttonPin))  && flag_off)
    {
      
      Serial.println("Fade Out");
      for (int i=0; i <= 255; i++)
      {
        analogWrite(ledLargo, 255 - i);
        //Serial.println(255 - i);   
        delay(10);
      }
      Serial.println("Apagado Led Largo");
      delay(60000);
      digitalWrite(ledCorto, LOW);
      Serial.println("Apagado Led Corto");
      flag_off = 0;
    }
  }

}