[app]
# Interface and port where the app will run its webserver.
address = "0.0.0.0:9000"

# Public root URL of the listmonk installation that'll be used
# in the messages for linking to images, unsubscribe page etc.
root = "https://listmonk.mysite.com"

# (Optional) full URL to the static logo to be displayed on
# user facing view such as the unsubscription page.
# eg: https://mysite.com/images/logo.svg
logo_url = "https://listmonk.mysite.com/public/static/logo.png"

# (Optional) full URL to the static favicon to be displayed on
# user facing view such as the unsubscription page.
# eg: https://mysite.com/images/favicon.png
favicon_url = "https://listmonk.mysite.com/public/static/favicon.png"

# The default 'from' e-mail for outgoing e-mail campaigns.
from_email = "listmonk <from@mail.com>"

# List of e-mail addresses to which admin notifications such as
# import updates, campaign completion, failure etc. should be sent.
# To disable notifications, set an empty list, eg: notify_emails = []
notify_emails = ["admin1@mysite.com", "admin2@mysite.com"]

# Maximum concurrent workers that will attempt to send messages
# simultaneously. This should ideally depend on the number of CPUs
# available, and should be based on the maximum number of messages
# a target SMTP server will accept.
concurrency = 5

# Maximum number of messages to be sent out per second per worker.
# If concurrency = 10 and message_rate = 10, then up to 10x10=100 messages
# may be pushed out every second. This, along with concurrency, should be
# tweaked to keep the net messages going out per second under the target
# SMTP's rate limits, if any.
message_rate = 5

# The number of errors (eg: SMTP timeouts while e-mailing) a running
# campaign should tolerate before it is paused for manual
# investigation or intervention. Set to 0 to never pause.
max_send_errors = 1000

# The number of subscribers to pull from the databse in a single iteration.
# Each iteration pulls subscribers from the database, sends messages to them,
# and then moves on to the next iteration to pull the next batch.
# This should ideally be higher than the maximum achievable throughput (concurrency * message_rate)
batch_size = 1000

[privacy]
# Allow subscribers to unsubscribe from all mailing lists and mark themselves
# as blacklisted?
allow_blacklist = false

# Allow subscribers to export data recorded on them?
allow_export = false

# Items to include in the data export.
# profile            Subscriber's profile including custom attributes
# subscriptions      Subscriber's subscription lists (private list names are masked)
# campaign_views     Campaigns the subscriber has viewed and the view counts
# link_clicks        Links that the subscriber has clicked and the click counts
exportable = ["profile", "subscriptions", "campaign_views", "link_clicks"]

# Allow subscribers to delete themselves from the database?
# This deletes the subscriber and all their subscriptions.
# Their association to campaign views and link clicks are also
# removed while views and click counts remain (with no subscriber
# associated to them) so that stats and analytics aren't affected.
allow_wipe = false


# Database.
[db]
host = "demo-db"
port = 5432
user = "listmonk"
password = "listmonk"
database = "listmonk"
ssl_mode = "disable"

# Maximum active and idle connections to pool.
max_open = 50
max_idle = 10

# SMTP servers.
[smtp]
    [smtp.my0]
        enabled = true
        host = "my.smtp.server"
        port = 25

        # "cram", "plain", or "login". Empty string for no auth.
        auth_protocol = "cram"
        username = "xxxxx"
        password = ""

        # Format to send e-mails in: html|plain|both.
        email_format = "both"

        # Optional. Some SMTP servers require a FQDN in the hostname.
        # By default, HELLOs go with "localhost". Set this if a custom
        # hostname should be used.
        hello_hostname = ""

        # Maximum concurrent connections to the SMTP server.
        max_conns = 10

        # Time to wait for new activity on a connection before closing
        # it and removing it from the pool.
        idle_timeout = "15s"

        # Message send / wait timeout.
        wait_timeout = "5s"

        # The number of times a message should be retried if sending fails.
	    max_msg_retries = 2

        # Enable STARTTLS.
        tls_enabled = true
        tls_skip_verify = false

        # One or more optional custom headers to be attached to all e-mails
        # sent from this SMTP server. Uncomment the line to enable.
        # email_headers = { "X-Sender" = "listmonk", "X-Custom-Header" = "listmonk" }

    [smtp.postal]
        enabled = false
        host = "my.smtp.server2"
        port = 25

        # cram or plain.
        auth_protocol = "plain"
        username = "xxxxx"
        password = ""

        # Format to send e-mails in: html|plain|both.
        email_format = "both"

        # Optional. Some SMTP servers require a FQDN in the hostname.
        # By default, HELLOs go with "localhost". Set this if a custom
        # hostname should be used.
        hello_hostname = ""

        # Maximum concurrent connections to the SMTP server.
        max_conns = 10

        # Time to wait for new activity on a connection before closing
        # it and removing it from the pool.
        idle_timeout = "15s"

        # Message send / wait timeout.
        wait_timeout = "5s"

        # The number of times a message should be retried if sending fails.
	    max_msg_retries = 2

        # Enable STARTTLS.
        tls_enabled = true
        tls_skip_verify = false

[upload]
# File storage backend. "filesystem" or "s3".
provider = "filesystem"

    [upload.s3]
        # (Optional). AWS Access Key and Secret Key for the user to access the bucket.
        # Leaving it empty would default to use instance IAM role.
        aws_access_key_id = ""
        aws_secret_access_key = ""

        # AWS Region where S3 bucket is hosted.
        aws_default_region = "ap-south-1"

        # Bucket name.
        bucket = ""

        # Path where the files will be stored inside bucket. Default is "/".
        bucket_path = "/"

        # Optional full URL to the bucket. eg: https://files.mycustom.com
        bucket_url = ""

        # "private" or "public".
        bucket_type = "public"

        # (Optional) Specify TTL (in seconds) for the generated presigned URL.
        # Expiry value is used only if the bucket is private.
        expiry = 86400

    [upload.filesystem]
        # Path to the uploads directory where media will be uploaded.
        upload_path="./uploads"

        # Upload URI that's visible to the outside world.
        # The media uploaded to upload_path will be made available publicly
        # under this URI, for instance, list.yoursite.com/uploads.
        upload_uri = "/uploads"